雅思小作文的流程图

雅思小作文的流程图

　　雅思流程图作文的流程描述需要按照箭头进行，且注意流程的起点和终点。下面是小编分享的雅思流程图作文范文，欢迎大家阅读!

　　1玻璃的回收流程

　　This diagram illustrates the recycling process of glass bottles. The whole process is a cycle which can be divided into three main stages.

　　In the first stage, used bottles are collected at a recycling point ready to be transported by a truck. The second stage starts in a cleaning plant, where these recycled bottles are sorted by color into green, brown and clear ones and washed by high-pressurized water. When the cleaning is done, the bottles are conveyed to a glass factory where they are cut into glass pieces which are then poured into a furnace. After being heated in the furnace, the broken glasses are melted into liquid, which flows into a glass mold. Here glass liquid from other sources is added and the molding process takes place. In the final stage, new, empty bottles are filled with liquid, then packed and dispatched to the supermarket ready to be picked by consumers. At this point, a cycle has been completed and a new cycle will begin.

　　2Kelsbey 村庄的变化

　　Given are three diagrams concerning the transformation of the village of Kelsbey over the period from 1780 to 2000.

　　It is manifest that the natural scenery of Kelsbey such as farm, woods disappeared at a staggering rate. To be more precise, the vast expanse of farm and woods in 1780 reduced dramatically to 1860, followed with a disappearance in 2000. However, an environment friendly place, namely wetland for birds came up in 2000, at the end of villager river.

　　In contrast, man-made constructions witnessed a prosperous development during the more than 2 centuries. Specifically, a bridge, a road and 200 homes were built until 1860, on the base of only 100 homes in 1780, which transformed into 2 roads, 500 houses, newly-built sports fields and schools, along with several shops at the river bank in the year 2000.

　　Overall, Kelsbey experienced a diminish of nature areas as well as a prosperity of man-made building and facilities over the more than two centuries period.

　　3巧克力的制作

　　The diagram shows the stages in the processof making chocolate　　Chocolate comes from the cacao tree, which is grown in parts of South America, Africa and Indonesia.The tree produces large red pods which contain white cocoa beans. Firstly,【when the pods are ripe,they are harvested, the beans are removed and they are fermented for several days in large wooden boxesDuring the fermenting process, the beans turn brown.

　　Next, the brown beans are spread in the sun to dry. They are then put in large sacksand transported by train or lorry. After this, the beans are taken to a chocolate factory where they are roasted in an oven at temperatures of between 250 and 350 degree Celsius.

　　After being roasted, the beans are crushed and the outer shell is removed. This part is not needed for making chocolate. Finally, the inner part of the bean is pressed and liquid chocolate is produced.

　　4塑料回形针

　　There are four main stages in the production of plastic paper clips from this small factory. Two of these stages involve actual preparation of the clips, while the other two consist of quality control before the clips are sent out from the factory to the retailers to be sold to the public.

　　To begin with, molten plastic is poured into three different moulds depending on the colour required; the colours are red, blue and yellow. Once these clips emerge from the moulds a quality control machine checks them for strength. Unsatisfactory clips are rejected. In the third stage in the process the clips are stored by hand into two groups, mixed and single colours. When this stage is complete the groups are checked a second time to ensure that the colour mixtures are divided correctly into single colours and mixed colour batches. Finally, the clips are packed and dispatched to the markets. (152 words)

　　5高中毕业生进入大学的过程

　　The flow chart shows the process of how a high school graduate can enter university. Overall, there are 3 clear stages, including the application, verification of administrators, and registration items about university.

　　Firstly, once a high school has been obtained, a student need to complete an application form by downloading it in relevant website. The filled form should then be sent to the administration.

　　Generally, after two-week confirmation, there are 3 possible results for the applicant, which are rejection, provisional acceptance, or acceptance. If the reply is a rejection, it means the student is still unqualified and has to either cancel the application or finish an application for an alternative course before resending it to the administration office.

　　In terms of the second possibility, or provisional acceptance, more documentation is required. The applicant is asked to prepare additional documentation and submit them to the office again.

　　Importantly, for a candidate whose application has been fully completed and received, the following steps consists of enrolment, selecting subjects according to the interests, and registering with the dean. With the final accomplishment of the paperwork and phases above, the applicant may enter university, officially.

　　6太阳能发电

　　The picture illustrates the process of producing electricity in a home using solar panels.

　　It is clear that there are fivedistinctstages in this process, beginning with the capture of energy from sunlight. The final two steps show how domestic electricity is connected to the external power supply.

　　At the first stage in the process, solar panels on the roof of a normal house take energy from the sun and convert it into DC current. Next, this current is passed to an inverter, which changes it to AC current and regulates the supply of electricity. At stage three, electricity is supplied to the home from an electrical panel.

　　At the fourth step shown on the diagram, a utility meter in the home is responsible for sending any extra electric power outside the house into the grid. Finally, if the solar panels do not provide enough energy for the household, electricity will flow from the utility grid into the home through the meter.(163)

　　7家居设计

　　The diagrams below show some principles of house design for cool and for warm climates.

　　The diagrams show how house designs differ according to climate.

　　The most noticeable difference between houses designed for cool and warm climates is in the shape of the roof. The designs also differ with regard to the windows and the use of insulation.

　　We can see that the cool climate house has a high-angled roof, which allows sunlight to enter through the window. Bycontrast, the roof of the warm climate house has a peak in the middle and roof overhangs to shade the windows. Insulation and thermal building materials are used in cool climates to reduce heat loss, whereas insulation and reflective materials are used to keep the heat out in warm climates.

　　Finally, the cool climate house has one window which faces the direction of the sun, while the warm climate house has windows on two sides which are shaded from the sun. By opening the two windows at night, the house designed for warm climates can be ventilated.

　　8蚕与蚕丝

　　The graphic illustrates the life process of the silkworm and the phases in the manufacture of silk material.

　　Overall, the life cycle is a natural process and contains four cyclical phases, beginning with the laying of eggs and ending with the birth of a new moth from a cocoon. The production of silk is, in contrast to the previous stage, a man-made linear process comprising of 6 main stages.

　　To begin with, eggs are produced by the moth and it takes 10 days for the eggs to hatch into silkworm larvae that feed on mulberry leaves. This stage takes between 4 and 6 weeks before the worms construct a cocoon from silk thread, taking approximately one week. They stay there for around a fortnight, subsequently emerging as moths and the process can begin again.

　　The first stage in the manufacture of silk is the selection of cocoons and these are then boiled. Once boiled, the silk thread is unwound to a length of between 300 and 900 meters. Finally, the silk can be twisted and weaved into cloth before being dyed.

　　(180 words)

【雅思小作文的流程图】相关文章：

雅思作文流程图范文06-09

雅思报名转考指南以及转考流程图06-06

雅思小作文模板必备句型06-20

雅思提高口语小技巧06-20

2017雅思小作文图表写作技巧大全05-13

雅思作文范文06-09

剑桥雅思6test3小作文（通用35篇）03-24

淘宝退货退款流程图片06-26

雅思复议时间及雅思复议费用介绍06-05

2014雅思作文范文06-09